Telit Wireless Solutions LE910C series - AT#HTTPSND - Send HTTP POST or PUT Request

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1414 of 1904 2022-03-04
Not Subject to NDA
3.20.2. AT#HTTPSND - Send HTTP POST or PUT request
This command performs a POST or PUT request to HTTP server and starts sending data
to the server.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#HTTPSND=<prof_id>,<command>,<resource>,<data_len>[,<post_param>[,<ext
ra_header_line>]]
server and starts sending data to the server.
The device shall prompt a three character
sequence <greater_than><greater_than><greater_than> (IRA 62, 62, 62) after
command line is terminated with <CR>; after that the data can be entered from
TE, sized <data_len> bytes.
Parameters:
Name
Type
Default
Description
<prof_id>
integer
N/A
indicating the profile identifier
Value:
0÷2
:
profile identifier
<command>
integer
N/A
indicating the command
requested
Values:
0
:
POST command
1
:
PUT command
<resource>
string
-
indicating the HTTP resource
(uri), object of the request
<data_len>
integer
-
indicating the data length to
input in Bytes