Telit Wireless Solutions LE910C series - Iot Portal; AT#DWCFG - Configure Devicewise Parameters

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1565 of 1904 2022-03-04
Not Subject to NDA
IoT Portal
3.25.1. AT#DWCFG - Configure DeviceWISE Parameters
Configure deviceWISE parameters. Here is a basic interaction diagram.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#DWCFG=[<serverUrl>[,<deviceIDSelector>[,<appToken>[,<security>[,<heartBeat
>[,<autoReconnect>[,<overflowHandling>[,<atrunInstanceId>[,<serviceTimeout>[,<c
ontextID>[,<unused_1>[,<unused_2>[,<unused_3>]]]]]]]]]]]]
This command permits to configure parameters related to the deviceWISE
functionality
Parameters:
Name
Type
Default
Description