Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 821 of 1904 2022-03-04
Not Subject to NDA
3.9.20. AT+CGEQOS - Define EPS Quality of Service
The command specifies the EPS Quality of Service parameters.
[1] 3GPP TS 23.203
[2] 3GPP TS 24.301
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CGEQOS=[<cid>[,<QCI> [,<DL_GBR>,<UL_GBR>
[,<DL_MBR>,<UL_MBR>]]]]
Set command specifies the EPS Quality of Service parameters.
A special form of the set command, +CGEQOS= <cid> causes the values for
context number <cid> to become undefined.
Parameters:
Name
Type
Default
Description
<cid>
integer
-
it specifies a particular EPS Traffic
Flows definition in EPS
<QCI>
integer
9
it specifies a class of EPS QoS, see
standard [1].
Values:
0
:
QCI is selected by network
1÷4
:
value range for guaranteed bit rate Traffic Flows
5÷9
:
value range for non-guaranteed bit rate Traffic
Flows
<DL_GBR>
integer
-
it indicates DL GBR in case of GBR QCI.
The value is in kbit/s. This parameter is

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English