Telit Wireless Solutions LE910C series - Ssl; AT#SSLCFG - Configure General Parameters of a SSL Socket

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1423 of 1904 2022-03-04
Not Subject to NDA
SSL
3.21.1. AT#SSLCFG - Configure General Parameters of a SSL Socket
This command configures SSL connection parameters.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#SSLCFG=<SSId>,<cid>,<pktSz>,<maxTo>,<defTo>,<txTo>[,<sslSRingMode>[,<no
CarrierMode>[,<skipHostMismatch>[,<UNUSED_4>]]]]
Set command allows configuring SSL connection parameters.
Parameters:
Name
Type
Default
Description
<SSId>
integer
1
Secure Socket Identifier
Value:
1
:
Until now SSL block manages only one
socket
<cid>
integer
-
PDP context identifier, see
+CGDCONT command.
<pktSz>
integer
0
packet size to be used by the
SSL/TCP/IP stack for data
sending
Values:
0
:
select automatically default value
(300)
1÷1500
:
number of bytes
<maxTo>
integer
90
exchange timeout or socket
inactivity timeout. In online
mode, if there's no data