Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1183 of 1904 2022-03-04
Not Subject to NDA
3.15.32. AT#CBC - Battery and Charger Status
This command returns the current Battery and Charger state.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#CBC
Execution command returns the current Battery and Charger state. The
response is in the format:
#CBC: <ChargerState>,<BatteryVoltage>
Additional info:
The response has its fields described below.
Name
Type
Default
Description
<ChargerState>
integer
0
Battery charger state
Values:
0
:
charger not connected
1
:
charger connected and charging
2
:
charger connected and charge
completed
<BatteryVoltage>
integer
-
battery voltage in units of
10 mV: it is the real
battery voltage only if
charger is not connected;
if the charger is connected
this value depends on the
charger voltage

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English