Telit Wireless Solutions LE910C series - AT+CSDF - Setting Date Format

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 693 of 1904 2022-03-04
Not Subject to NDA
3.7.3. AT+CSDF - Setting Date Format
This command sets the date format of the date information presented to the user.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
AT+CSDF=[<mode>[,<auxmode>]]
This command sets the date format of the date information presented to
the user, which is specified by use of the <mode> parameter. The <mode>
affects the date format on the phone display and doesn't affect the date
format of the AT command serial interface, so it has no effect on our
device.
The command also sets the date format of the TE-TA interface, which is
specified by use of the <auxmode> parameter (i.e., the <auxmode> affects
the <time> of +CCLK).
Parameters:
Name
Type
Default
Description
<mode>
integer
1
phone display data format.
Values:
1
:
DD-MMM-YYYY
2
:
DD-MM-YY
3
:
MM/DD/YY
4
:
DD/MM/YY
5
:
DD.MM.YY
6
:
YYMMDD
7
:
YY-MM-DD