Telit Wireless Solutions LE910C series - AT#DHCPV6 DELEGATION - DHCPV6 Delegation Mode Set

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 188 of 1904 2022-03-04
Not Subject to NDA
3.2.2.47. AT#DHCPV6DELEGATION - DHCPV6 Delegation Mode Set
DHCPv6 Delegation Mode Set
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#DHCPV6DELEGATION=<cid>,<mode>
Set command specifies the DHCPv6 delegation mode on profile.
Parameters:
Name
Type
Default
Description
<cid>
integer
N/A
PDP context identifier
Value:
1÷max
:
specifies a particular PDP context definition (see
+CGDCONT command)
<mode>
integer
0
multiplexer transparency
mechanism
Values:
0
:
disable
1
:
enable
mode can be set when profile exists.
this command only supports to LE910Cx-EU, LE910C1-EUX.
AT#DHCPV6DELEGATION?
Read command returns the current value of <cid>,<mode> parameter.