Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 609 of 1904 2022-03-04
Not Subject to NDA
3.6.8. AT+CSAS - Save Settings
Execution command saves settings which have been made by the +CSCA, +CSMP and
+CSCB commands in local non-volatile memory.
3GPP TS 27.005
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CSAS=<profile>
Parameter:
Name
Type
Default
Description
<profile>
integer
0
Index of the profile where the settings are
saved
Values:
0
:
it saves the settings to NVM
1÷n
:
SIM profile number; the value of <n> depends on
the SIM.
Certain settings may not be supported by the SIM and therefore
they are always saved to NVM, regardless the value of <profile>.
If parameter is omitted the settings are saved in the non-volatile
memory.
AT+CSAS=?

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English