Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1211 of 1904 2022-03-04
Not Subject to NDA
IPEasy
3.17.1. AT#SGACT - PDP Context Activation
This command enables/disables the PDP context activation.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SGACT=<cid>,<stat>[,<userId>,<pwd>]
Execution command is used to activate the specified PDP context, followed
by binding data application to the PS network. Also, it is used to deactivate
the PDP context and unbind data application from PS network.
Parameters:
Name
Type
Default
Description
<cid>
integer
N/A
PDP context identifier
numeric parameter which specifies a
particular PDP context definition
The value of max is returned by the Test
command.
Value:
1÷max
:
specifies a particular PDP context definition
(see +CGDCONT command)
<stat>
integer
N/A
activate/deactivate the PDP context
specified
Values:

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English