Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 842 of 1904 2022-03-04
Not Subject to NDA
3.9.28. AT+CGTFTRDP - Traffic Flow Template Read Dynamic Parameters
This command returns the relevant information about Traffic Flow Template of <cid>
together with the additional network assigned values when established by the network.
3GPP TS 27.007; 3GPP TS 03.60/23.060
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CGTFTRDP=[<cid>]
The execution command returns the relevant information about Traffic Flow
Template for an active secondary or non secondary PDP context specified by <cid>
together with the additional network assigned values when established by the
network.
If the parameter <cid> is omitted, the Traffic Flow Templates for all active
secondary and non secondary PDP contexts are returned.
Parameters of both network and MT/TA initiated PDP contexts returned.
Possible Response(s):
+CGTFTRDP: <cid>, <packet filter identifier>, <evaluation precedence index>,
<source address and subnet mask>, <protocol number (ipv4) / next
header(ipv6)>,<destination port range>, <source port range>, <ipsec security
parameter index (spi)>, <type of service (tos) (ipv4) and mask / traffic class (ipv6)
and mask>, <flow label ipv6)>, <direction>, <NW packet filter Identifier>[<CR><LF>
+CGTFTRDP: <cid>, <packet filter identifier>, <evaluation precedence index>,
<source address and subnet mask>, <protocol number (ipv4) / next header (ipv6)>,
<destination port range>, <source port range>, <ipsec security parameter index
(spi)>, <type of service (tos) (ipv4) and mask / traffic class (ipv6) and mask>, <flow
label (ipv6)>, <direction>,<NW packet filter Identifier> [...]]
Parameter:
Name
Type
Default
Description

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English