Telit Wireless Solutions LE910C series - AT+CCUG - Closed User Group

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 403 of 1904 2022-03-04
Not Subject to NDA
3.4.14. AT+CCUG - Closed User Group
This command allows control of the Closed User Group supplementary service.
3GPP TS 27.007
3GPP TS 22.085
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CCUG=[<n>[,<index>[,<info>]]]
Set command enables the served subscriber to select a CUG index, to
suppress the Outgoing Access (OA), and to suppress the preferential CUG.
Parameters:
Name
Type
Default
Description
<n>
integer
0
enables/disables the CUG
temporary mode
Values:
0
:
disable CUG temporary mode
1
:
enable CUG temporary mode. it enables to control the
CUG information on the air interface as a default
adjustment for all following outgoing calls.
<index>
integer
10
Closed Used Group index
Values:
0÷9
:
CUG index
10
:
no index (preferred CUG taken from subscriber
data)