Telit Wireless Solutions LE910C series - AT#RXDIV - Enable RX Diversity and Set DARP

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1151 of 1904 2022-03-04
Not Subject to NDA
3.15.24. AT#RXDIV - Enable RX Diversity and Set DARP
This command enables the RX Diversity and sets DARP.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#RXDIV=<divEnable>,<DARPMode>
Set command enables/disables the RX Diversity and sets DARP.
Parameters:
Name
Type
Default
Description
<divEnable>
integer
1
enable/disable the RX
Diversity
Values:
0
:
disable
1
:
enable
6
:
Test mode. The main antenna port is used for
the Tx chain; second antenna port is used as the
only Rx chain
<DARPMode>
integer
1
select DARP mode
Values:
0
:
DARP not supported
1
:
DARP phase 1
The values set by command are available at next power-on.