Telit Wireless Solutions LE910C series - AT#SMSMODE - SMS Commands Operation Mode

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 664 of 1904 2022-03-04
Not Subject to NDA
3.6.21. AT#SMSMODE - SMS Commands Operation Mode
SMS Commands Operation Mode.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#SMSMODE=<mode>
Set command enables/disables the check for presence of SMS Service
Centre Address (SCA) in the Fixed Dialing Number (FDN) phonebook.
Parameter:
Name
Type
Default
Description
<mode>
integer
1
Enables/disables the check for
presence of SCA in FDN
phonebook.
Values:
1
:
Disables the check for presence of SCA in FDN
phonebook.
2
:
Enables the check for presence of SMS SCA in the
FDN phonebook when FDN are enabled. If the SMS
SCA is not present a SMS cannot be sent.
AT#SMSMODE?
Read command reports whether the check of SMS SCA in FDN phonebook
is enabled or not, in the format:
#SMSMODE: <mode>
AT#SMSMODE=?