Telit Wireless Solutions LE910C series - AT#GTPEN - Configure the GTP WWAN Service

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1708 of 1904 2022-03-04
Not Subject to NDA
3.28.1.23. AT#GTPEN - Configure the GTP WWAN Service
This command set to configure the GTP (Global Terrestrial Positioning) WWAN service.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#GTPEN=<enable>
Set command to configure the GTP (Global Terrestrial Positioning) WWAN
Service.
Parameter:
Name
Type
Default
Description
<enable>
integer
0
Configure the GTP WWAN Service
Values:
0
:
Disable
1
:
Enable
AT#GTPEN?
Read command returns the GTP (Global Terrestrial Positioning) WWAN
Service configuration, in the format:
#GTPEN: <enable>
AT#GTPEN=?
Test command returns the supported range of values for parameter
<enable>