Telit Wireless Solutions LE910C series - AT#ECALL - Embedded IVS Inband Modem Enabling

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1063 of 1904 2022-03-04
Not Subject to NDA
3.13.2. AT#ECALL - Embedded IVS Inband Modem Enabling
This command enables embedded IVS modem
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Common
profile
No
-
2
AT#ECALL=<mode>
Set command enables/disables the embedded IVS modem.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
enables/disables IVS modem
Values:
0
:
disable
1
:
enable
Additional info:
The sending of a MSD is pointed out with an unsolicited message
through AT interface that can report the HL-ACK data bits or an
error code in the following format:
#ECALLEV: <prim>,<data>
Unsolicited fields:
Name
Type
Description
<prim>
integer
error code
Values: