Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1064 of 1904 2022-03-04
Not Subject to NDA
0
:
Pull-IND
1
:
Data_CNF
2
:
AL-Ack
16
:
sync loss
<data>
string
Data content of Application Layer message (only with
AL-Ack)
the value set by command is not saved and a software or hardware
reset restores the default value.
The value can be stored in NVM using profiles
When IVS modem is enabled PCM playing, PCM recording and
DTMF decoding are automatically disabled (#SPCM or #DTMF will
return error)
+CECALL command supersedes this command because it enables
automatically eCall functionality
AT#ECALL?
Read command returns the current value of <mode> in the format:
#ECALL: <mode>
AT#ECALL=?
Test command returns the supported values for <mode>

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English