Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 346 of 1904 2022-03-04
Not Subject to NDA
3.2.5.10. AT#DIALMODE - Set Dialing Mode
This command sets dialing modality.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#DIALMODE=[<mode>]
Set command sets dialing modality.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
sets dialing modality
Values:
0
:
voice call only, see Additional info
1
:
voice call only, see Additional info
2
:
voice call and data call, see Additional info
Additional info:
<mode>=0
Voice call only, OK result code is received as soon as it starts
remotely ringing.
<mode>=1
Voice call only, OK result code is received only after the called party
answers. Any character typed aborts the call and OK result code is
received.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English