Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1728 of 1904 2022-03-04
Not Subject to NDA
3.28.3.6. AT$GPSR - Reset the GNSS Controller
This command resets the GNSS controller.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Other
No
-
2
AT$GPSR=<resetType>
Set command allows to reset the GNSS controller.
Parameter:
Name
Type
Default
Description
<resetType>
integer
3
set the
type of
GNSS
controller
reset.
Values:
0
:
Factory Reset: this option clears all the GNSS
memory including Clock Drift.
1
:
Coldstart (No Almanac, No Ephemeris): this
option clears all data that is currently stored in
the internal memory of the GNSS receiver
including Position, Almanac, Ephemeris and Time.
The stored Clock Drift is retained.
2
:
Warmstart (No ephemeris): this option clears all
initialization data in the GNSS receiver and
subsequently reloads the data that is currently
displayed in the Receiver Initialization Setup
screen. The Almanac is retained but the
Ephemeris is cleared.
3
:
Hotstart (with stored Almanac and Ephemeris):
the GNSS receiver restarts by using all data that
is currently stored in the internal memory of the

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English