Telit Wireless Solutions LE910C series - Digital Voice Interface; AT#DVI - Digital Voiceband Interface

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1027 of 1904 2022-03-04
Not Subject to NDA
3.12.6. Digital Voice Interface
3.12.6.1. AT#DVI - Digital Voiceband Interface
Digital Voiceband Interface handling.
[1] Hardware User's Guide of the used module
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Common
profile
No
-
2
AT#DVI=<mode>[,<dviport>,<clockmode>]
Set command enables/disables the Digital Voiceband Interface, see
documents [1].
Parameters:
Name
Type
Default
Description
<mode>
integer
1
Enables/disables the
DVI
Values:
0
:
disable DVI; audio is forwarded to the analog
line; DVI pins should be Not Connected/or Tri-
State
1
:
Enable DVI: audio is forwarded to the DVI block
<dviport>
integer
2
Select DVI port
Value:
2
:
DVI port 2 will be used
<clockmode>
integer
1
Select DVI clock mode