Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1552 of 1904 2022-03-04
Not Subject to NDA
3.24.3. AT#EVMONI - Event Monitoring
This command provides a set of events that can be configured and monitored the device.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#EVMONI=<label>,<mode>[,<paramType>,<param>]
Set command enables/disables the single event monitoring, configures
the related parameters and associates the AT command string to execute
when the event has occurred.
Parameters:
Name
Type
Default
Description
<label>
string
N/A
event type; For each <label> (or event)
is dedicated an Additional info section
to describe the command syntax and
its behavior.
Values:
"VBATT"
:
battery voltage monitoring
"DTR"
:
DTR monitoring
"ROAM"
:
roaming monitoring
"CONTDEACT"
:
context deactivation monitoring
"RING"
:
call ringing monitoring
"STARTUP"
:
module start-up monitoring
"REGISTERED"
:
network registration monitoring
"GPIO1"
:
monitoring on a selected GPIO in
the GPIO range

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English