Telit Wireless Solutions LE910C series - AT#CHBHCID - Change Context ID

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 489 of 1904 2022-03-04
Not Subject to NDA
3.4.40. AT#CHBHCID - Change Context ID
This command is used to change CID (Context ID) of backhaul connection.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#CHBHCID=<IPFamily>,<CID>
Set command used to change CID (Context ID) for a backhaul (internal
application processor data interface) connection.
Parameters:
Name
Type
Default
Description
<IPFamily>
integer
N/A
4 is IPV4, 6 is IPV6
Values:
4
:
IPV4
6
:
IPV6
<CID>
integer
N/A
Context ID
Value:
1÷24
:
range [1 - 24]
This command just change CID without establishing backhaul
connection.
AT#CHBHCID?
Get current backhaul's CID for each IPV4 and IPV6