Telit Wireless Solutions LE910C series - AT#SSLRECV - Read Data from a SSL Socket

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1437 of 1904 2022-03-04
Not Subject to NDA
3.21.6. AT#SSLRECV - Read Data from a SSL Socket
This command reads data from a SSL socket.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SSLRECV=<SSId>,<MaxNumByte>[,<Timeout>]
Set command allows to receive data, arrived through a connected secure
socket. Data has been buffered and not read yet.
Parameters:
Name
Type
Default
Description
<SSId>
integer
1
secure socket identifier
Value:
1
:
until now only one SSL socket is supported
<MaxNumByte>
integer
N/A
maximum number of bytes to read
Value:
1÷1000
:
maximum number of bytes to read
<Timeout>
integer
100
time-out in 100 ms units
Value:
1÷5000
:
hundreds of ms
Additional info:
If data are received, the device responds: