Telit Wireless Solutions LE910C series - ATS30 - Disconnect Inactivity Timer

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 278 of 1904 2022-03-04
Not Subject to NDA
3.2.3.12. ATS30 - Disconnect Inactivity Timer
This command defines disconnect inactivity timer.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Specific profile
No
-
2
ATS30=<tout>
Set command defines the inactivity time-out in minutes. The device
disconnects if no characters are exchanged for a time period of at least
<tout> minutes.
Parameter:
Name
Type
Default
Description
<tout>
integer
0
expressed in minutes
Values:
0
:
disabled, disconnection due to inactivity is disabled
1÷127
:
inactivity time-out value
ATS30?
Read command returns the current value of S30 parameter.
The format of the numbers in output is always 3 digits, left-filled
with 0s.