Telit Wireless Solutions LE910C series - Event Monitor; AT#ENAEVMONI - Enable Evmoni Service

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1548 of 1904 2022-03-04
Not Subject to NDA
Event Monitor
3.24.1. AT#ENAEVMONI - Enable EvMoni Service
This command enables/disables the EVENT MONITOR service.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#ENAEVMONI=<mod>
Set command enables/disables the EVMoni service.
Parameter:
Name
Type
Default
Description
<mod>
integer
0
enable/disable service
Values:
0
:
disable service
1
:
enable service
When the service is active on a specific AT instance, that instance
cannot be used for any other scope, except for OTA service that has
the highest priority. For example, in the multiplexer request to
establish the Instance, the request will be rejected
AT#ENAEVMONI?
Read command returns the current settings of <mode> and the value of
<stat> in the format:
#ENAEVMONI: <mod>,<stat>
Additional info: