Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 611 of 1904 2022-03-04
Not Subject to NDA
3.6.9. AT+CRES - Restore Settings
Execution command restores message service settings saved by +CSAS command from
either NVM or SIM.
3GPP TS 27.005
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+CRES[=<profile>]
Parameter:
Name
Type
Default
Description
<profile>
integer
N/A
Defines which message service
profiles to restore.
Values:
0
:
restores message service settings from NVM
1÷n
:
restores message service settings from SIM. The n
value depends on the SIM.
Certain settings may not be supported by the SIM and therefore
they are always restored from NVM, regardless the value of
<profile>
If parameter is omitted the command restores message service
settings from NVM.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English