Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1294 of 1904 2022-03-04
Not Subject to NDA
3.17.32. AT#DSTO - Data Sending Time-Out
This command sets the maximum time to await before sending a packet whose size in
less than the default one.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Other
No
-
2
AT#DSTO=[<tout>]
Set command sets the maximum time that the module awaits before
sending anyway a packet whose size is less than the default one. Used for
online data mode only.
Parameter:
Name
Type
Default
Description
<tout>
integer
50
packet sending time-out in 100ms units
Values:
0
:
no time-out, wait forever for packets to be
completed before send
1÷255
:
hundreds of ms
in order to avoid low performance issues, it is suggested to set the
data sending time-out to a value greater than 5
this time-out applies to data whose size is less than packet size
and whose sending would have been delayed for an undefined time
until new data to be sent had been received and full packet size
reached
AT#DSTO?
Read command reports the current data sending time-out value.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English