Telit Wireless Solutions LE910C series - HW and Radio Control; AT#ETHMAC - Configure MAC Address for Ethernet Interface

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1090 of 1904 2022-03-04
Not Subject to NDA
HW and Radio Control
3.15.1. AT#ETHMAC - Configure MAC Address for Ethernet Interface
Configure hardware MAC address for ethernet interface
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
Yes
-
2
AT#ETHMAC=<macaddr>
Set command configures MAC address for ethernet interface.
Parameter:
Name
Type
Default
Description
<macaddr>
string
-
MAC address, the parameter should
include double quotes("")
e.g. "xx:xx:xx:xx:xx:xx"
Written MAC address is maintained after firmware updating.
This command is supported for LE910C1-EU/NF/LA (4G+2G).
AT#ETHMAC?
Read MAC address stored for ethernet interface.
AT#ETHMAC=?
Test command returns OK.