Telit Wireless Solutions LE910C series - AT#SKTD - Socket Dial

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1338 of 1904 2022-03-04
Not Subject to NDA
3.17.49. AT#SKTD - Socket Dial
This command opens a socket.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SKTD=[<socketType>[,<remotePort>[,<remoteAddr>[,<closureType>[,<localPo
rt>[,<userIpType>]]]]]]
Set command opens the socket towards the peer specified in the parameters.
Parameters:
Name
Type
Defau
lt
Description
<socketTyp
e>
intege
r
0
socket protocol type
Values:
0
:
TCP
1
:
UDP
<remotePo
rt>
intege
r
3333
remote host port to be opened
Value:
1÷65535
:
port number
<remoteAd
dr>
string
-
address of the remote host, string type. This
parameter can be either:
- any valid IP address in the format:
xxx.xxx.xxx.xxx
- any valid IPv6 address in the format:
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx or
xxx.xxx.xxx.xxx.xxx.xxx.xxx.xxx.xxx.xxx.xxx.xxx.xxx
.xxx.xxx.xxx