Telit Wireless Solutions LE910C series - Audio File Management; AT#ACDB - Store the ACDB(Audio Calibration Database) File

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1040 of 1904 2022-03-04
Not Subject to NDA
3.12.7. Audio File Management
3.12.7.1. AT#ACDB - Store the ACDB(Audio Calibration Database) file
LE910Cx Linux:
This command used to store ACDB(Audio Calibration Database) file on file system or to
read current size of specific ACDB file.
LE910Cx ThreadX:
Injection of Audio Configuration.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#ACDB=<mode>,<category>[,<size>]
LE910Cx Linux:
Set command to store <category> acdb file on FS or to return the current
size in Bytes of specific <category> file.
LE910Cx ThreadX:
Execution command starts injection of Audio configuration (ACDB) into the
device. Once command is issued, the device will print the "connect" reply
and will wait for data to be received.
+++ sequence can be used for end of data transmission (which will result
in OK response).
Parameters:
Name
Type
Default
Description
<mode>
integer
N/A
required action
Values: