Telit Wireless Solutions LE910C series - AT#PASSW - Authentication Password

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1289 of 1904 2022-03-04
Not Subject to NDA
3.17.29. AT#PASSW - Authentication Password
This command sets the user password string.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Other
No
-
2
AT#PASSW=[<pwd>]
Set command sets the user password string to be used during the
authentication step.
Parameter:
Name
Type
Default
Description
<pwd>
string
-
it's the authentication password; the max
length for this value is the output of Test
command, AT#PASSW=? (Factory default is
the empty string "").
AT#PASSW=?
Test command returns the maximum allowed length of the string
parameter <pwd>.
•
Set the password "myPassord"
AT#PASSW="myPassword"
OK