Telit Wireless Solutions LE910C series - AT&Z - Store Telephone Number in the Internal Phonebook

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 217 of 1904 2022-03-04
Not Subject to NDA
3.2.2.60. AT&Z - Store Telephone Number in the Internal Phonebook
The command stores a telephone number in the internal phonebook.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT&Z<n>=<nr>
Execution command stores the telephone number <nr> in the record <n>.
Parameters:
Name
Type
Default
Description
<n>
integer
N/A
phonebook record
Value:
0÷9
:
record number
<nr>
string
-
telephone number (maximum length 24
digits)
The module has a built-in non-volatile memory where 10 telephone
numbers can be stored, each one having a maximum of 24 digits.
The records cannot be overwritten and must be cleared before
rewriting. To delete the record <n>, issue the command
AT&Z<n>=<CR>.
The records in the module memory can be viewed with the
command &N, and the phone number stored in record <n> can be
dialed using the ATDS=<n>.