Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 893 of 1904 2022-03-04
Not Subject to NDA
3.10.17. AT#RSEN - Remote SIM Enable
This command used to enable or disable the remote SIM feature.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#RSEN=<mode>[,<sap_format>,<role>,<port>,<beacon>]
Set command enables/disables the Remote SIM feature.
If the status of the remote SIM changes, then the status is shown with the
following URC:
#RSEN: <conn>
<conn> parameter is described in Unsolicited fields section.
Parameters:
Name
Type
Default
Description
<mode>
integer
N/A
mode
Values:
0
:
disable
1
:
enable
<sap_format>
integer
1
SAP format
Value:
1
:
binary SAP
<role>
integer
0
client or server role
Value:
0
:
remote SIM client

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English