Telit Wireless Solutions LE910C series - Page 894

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 894 of 1904 2022-03-04
Not Subject to NDA
<port>
integer
1
mandatory if <mode> is 1 and
<sap_format> is 1
Value:
1
:
dummy value
<beacon>
integer
0
retransmission timer of SAP
connection request
Value:
0÷100
:
timer interval in seconds (dummy value)
Unsolicited field:
Name
Type
Description
<conn>
integer
connection status
Values:
0
:
disconnected
1
:
connected
AT#RSEN?
Read command returns the connection status of the remote SIM, in the
format:
#RSEN: <conn>
AT#RSEN=?
Test command reports the supported range of values for parameters
<mode>, <sap_format>, <role>, <port> and <beacon>.