Telit Wireless Solutions LE910C series - AT#WLANEAPCERT - Store WLAN EAP Certificates

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 732 of 1904 2022-03-04
Not Subject to NDA
3.8.13. AT#WLANEAPCERT - Store WLAN EAP Certificates
Store WLAN EAP Certificates
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#WLANEAPCERT=<cert_type>,<size>
Set command to store certificate files (CA Certificate, Client Certificate,
and Client Private key) required for WPA2-EAP methods, into NVM.
Parameters:
Name
Type
Default
Description
<cert_type>
integer
0
Certificate type to be stored.
Values:
0
:
CA certificate from EAP server
1
:
Client certificate for TLS method
2
:
Client private key file for TLS
<size>
integer
-
Size of certificate to be loaded. 1..8192
Certificate file data should be in PEM format.
To complete the certificate store operation, send Ctrl-Z char (0x1A
hex) to exit without writing the file data send ESC char (0x1B hex).
If the #WLANEAPCERT command is issued again, same certificate
file will be overwritten with latest command input.
AT#WLANEAPCERT?
Read command returns error.