Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 724 of 1904 2022-03-04
Not Subject to NDA
3.8.8. AT#WLANCONNECT - Connect to SSID
This command is used to connect to a given SSID.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#WLANCONNECT=<ssid>[,<security>,<key>]
Set command for client mode only, to connect to a given SSID.
Parameters:
Name
Type
Default
Description
<ssid>
string
-
SSID
<security>
integer
N/A
security
Values:
0
:
WEP
1
:
WPAX
2
:
WPA2-EAP
3
:
WPA3 SAE
<key>
string
-
key
The <key> length must be of 32 characters or less.
For security type WPA2, <key> parameter is not used
AT#WLANCONNECT?
Read command returns the SSID to which it connects into the format:

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English