Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 80 of 1904 2022-03-04
Not Subject to NDA
3.1.7. AT#ECAMURC - Extended Call Monitoring Unsolicited Response mode
This command Change the mode of #ECAM URC presentation.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT#ECAMURC=<mode>
Set command Change the mode of #ECAM URC presentation.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
Values:
0
:
The presentation of the #ECAM URC between at
command and response (default value).
1
:
The presentation of the #ECAM URC information after
at command response.
The setting is saved in NVM and available on following reboot.
AT#ECAMURC?
Read command reports last <mode>, in the format:
#ECAMURC:<mode>
AT#ECAMURC=?
Test command reports the supported range of values for parameter
<mode>

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English