Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 764 of 1904 2022-03-04
Not Subject to NDA
3.8.30. AT#WLANCOUNTRYCODE - Set the regulatory domain
This command is used to change the country code.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#WLANCOUNTRYCODE=<country_code>
Set command allows to change the country code. Relevant for AP mode
only.
Parameter:
Name
Type
Default
Description
<country_code>
string
-
Country Code
Note: This can limit available channels and transmit power.
Default: US
AT#WLANCOUNTRYCODE?
Read Command returns the current country code in the format:
#WLANCOUNTRYCODE: <string>
Example:
at#wlancountrycode?
#WLANCOUNTRYCODE: US
OK
AT#WLANCOUNTRYCODE=?
Test command returns OK

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English