Telit Wireless Solutions LE910C series - AT#ECALLURC - Enable;Disable Ecall URC

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1078 of 1904 2022-03-04
Not Subject to NDA
3.13.10. AT#ECALLURC - Enable/Disable eCall URC
The command manages the eCall Unsolicited Result Codes allowing the user to know
the eCall events in real-time.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#ECALLURC=<mode>
The command selects eCall URC with the following format:
#ECALLEV: <stat>[,<data>]
Parameter:
Name
Type
Default
Description
<mode>
integer
0
Sets the URC mode with the related
unsolicited result code configuration.
Values:
0
:
eCall URC Version 1, stat = {0,1,2}
1
:
eCall URC Version 2, stat = {0,1,2,11,12}
2
:
eCall URC Version 3, stat = {0,1,2,5,6,7,11,12}
Unsolicited fields:
Name
Type
Description
<stat>
integer
It reports the last eCall event occurred.
Values:
0
:
eCall START message detected
1
:
eCall LL-ACK message detected