Telit Wireless Solutions LE910C series - AT+CALD - Delete Alarm

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 710 of 1904 2022-03-04
Not Subject to NDA
3.7.11. AT+CALD - Delete Alarm
This command deletes an alarm in the ME.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT+CALD=<n>
Execution command deletes an alarm in the ME.
Parameter:
Name
Type
Default
Description
<n>
integer
N/A
alarm index
Value:
0
:
alarm index
AT+CALD=?
Test command reports the range of supported values for <n> parameter.