Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 879 of 1904 2022-03-04
Not Subject to NDA
3.10.9. AT+CCHO - Open Logical Channel
Open Logical Channel
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CCHO=<dfname>
Execution command causes the MT to return <sessionId> to allow the TE
to identify a channel that is being allocated by the currently selected UICC,
which is attached to ME. The currently selected UICC will open a new
logical channel, select the application identified by the <dfname> received
with this command and return a <sessionId> as the response. The ME
shall restrict the communication between the TE and the UICC to this
logical channel.
The response message of the command is in the format:
+CCHO: <sessionId>
The <sessionId> is described in the Additional info section.
Error case:
+CME ERROR: <err>
Parameter:
Name
Type
Default
Description
<dfname>
string
-
all selectable applications in the UICC are
referenced by a DF name coded on 1 to 16
bytes

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English