Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 504 of 1904 2022-03-04
Not Subject to NDA
3.4.45. AT#SELBNDMODE - Select Band configuration mode
This command selects band configuration mode
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#SELBNDMODE=[<mode>]
Set command configures the mode of band set between #BND and
#BNDRAM.
Parameter:
Name
Type
Default
Description
<mode>
integer
0
band configuration mode
Values:
0
:
It makes to enable the #BND set cmd and disable the
#BNDRAM’s
1
:
It makes to enable the #BNDRAM set cmd and disable
the #BND’s
AT#SELBNDMODE?
Read command reports the band configuration mode in the format:
#SELBNDMODE: <mode>
AT#SELBNDMODE=?
Test command reports the supported values for the parameter <mode>.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English