Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1298 of 1904 2022-03-04
Not Subject to NDA
3.17.34. AT#SKTOP - Socket Open
This command activates the context number 1, proceeds with the authentication with the
user ID and password previously set by #USERID and #PASSW commands, and opens a
socket connection with the host specified in the #SKTSET command.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT#SKTOP
Execution command activates the context number 1, proceeds with the
authentication with the user ID and password previously set by #USERID
and #PASSW commands, and opens a socket connection with the host
specified in the #SKTSET command. Eventually, before opening the
socket connection, it issues automatically a DNS query to solve the IP
address of the host name.
If the connection succeeds a CONNECT indication is sent, otherwise a
NO CARRIER indication is sent.
This command is obsolete.
It's suggested to use the couple #SGACT and #SO instead of it.
AT#SKTOP=?
Test command returns the OK result code.
•
AT#SKTOP
..GPRS context activation, authentication and socket open..
CONNECT

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English