Telit Wireless Solutions LE910C series - AT$LCSAGLO - Selection of Positioning Protocols for A-GLONASS

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1697 of 1904 2022-03-04
Not Subject to NDA
3.28.1.18. AT$LCSAGLO - Selection of Positioning protocols for A-GLONASS
This command set selection of positioning protocols (RRLP, RRC, LPP) for A-GLONASS.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT$LCSAGLO=<mask>
Set command sets the selection of positioning protocols for A-GLONASS.
Parameter:
Name
Type
Default
Description
<mask>
integer
0
protocol mask of A-GLONASS
0: Not selected
1: RRC control plane (In case AT&T, Default)
2: RRLP user plane
4: LPP user plane
8: LPP control plane
Value:
0÷15
:
protocol mask of A-GLONASS