Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 881 of 1904 2022-03-04
Not Subject to NDA
3.10.10. AT+CCHC - Close Logical Channel
Close Logical Channel
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CCHC=<sessionId>
Execution command asks the ME to close a communication session with the
active UICC. The ME shall close the previously opened logical channel. The
TE will no longer be able to send commands on this logical channel. The
UICC will close the logical channel when receiving this command.
Error case:
+CME ERROR: <err>
Parameter:
Name
Type
Default
Description
<sessionId>
integer
-
a session Id to be used in order to
target a specific application on the
smart card (e.g. (U)SIM, WIM, ISIM)
using logical channels mechanism
AT+CCHC=?
Test command returns the OK result code.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English