Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1734 of 1904 2022-03-04
Not Subject to NDA
3.28.4. GNSS Positioning Information
3.28.4.1. AT$GPSNMUN - Unsolicited NMEA Data Configuration
Unsolicited NMEA data configuration
NMEA 0183 Standard
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT$GPSNMUN=<enable>[,<GGA>,<GLL>,<GSA>,<GSV>,<RMC>,<VTG>]
Set command allows to activate an unsolicited GNSS data stream built
with NMEA sentences on the standard serial port and defines which NMEA
sentences will be available. Refer to document [1] to have information on
the NMEA sentences contents and formats.
Parameters:
Name
Type
Default
Description
<enable>
integer
0
Enables unsolicited GNSS data stream and
selects one of the available GNSS data
stream format display. <enable>
parameter is also used to disable the
GNSS data stream. Here is the list of the
<enable> values. See Additional info
section to have information on GNSS data
stream formats.
Values:
0
:
disable GNSS data stream
1
:
enable the first GNSS data stream format
2
:
enable the second GNSS data stream format

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English