Telit Wireless Solutions LE910C series At Commands Reference Guide

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 832 of 1904 2022-03-04
Not Subject to NDA
3.9.24. AT+CGATT - PS Attach or Detach
This execution command is used to register (attach) the terminal to or deregister
(detach) the terminal from the Packet Domain service.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
No
No
-
2
AT+CGATT=<state>
Parameter:
Name
Type
Default
Description
<state>
integer
N/A
state of PS attachment
Values:
0
:
detached
1
:
attached
AT+CGATT?
Read command returns the current PS state in the format:
+CGATT: <state>
AT+CGATT=?
Test command returns the values range of the <state> parameter.

Telit Wireless Solutions LE910C series Specifications

General

Brand	Telit Wireless Solutions
Model	LE910C series
Category	Wireless modules
Language	English