Telit Wireless Solutions LE910C series - AT+CGDCONT - Define PDP Context

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 779 of 1904 2022-03-04
Not Subject to NDA
3.9.6. AT+CGDCONT - Define PDP Context
Define PDP Context.
3GPP TS 27.007
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Required
Auto
No
-
2
AT+CGDCONT=[<cid>[,<PDP_type>[,<APN>[,<PDP_addr>[,<d_comp>[,<h_comp>[,<I
Pv4AddrAlloc>[,<Emergency_ind>]]]]]]]]
Set command specifies PDP context parameter values for a PDP context identified
by the (local) context identification parameter, <cid>.
Parameters:
Name
Type
Default
Description
<cid>
integer
-
(PDP Context Identifier) numeric
parameter which specifies a
particular PDP context definition.
1..max - where the value of max
is returned by the Test command.
<PDP_type>
string
N/A
(Packet Data Protocol type) a
string parameter which specifies
the type of packet data protocol.
Values:
"IP"
:
Internet Protocol
"PPP"
:
Point to Point Protocol
"IPV6"
:
Internet Protocol, Version 6
"IPV4V6"
:
Virtual <PDP_type> introduced to
handle dual IP stack UE capability