Telit Wireless Solutions LE910C series - Page 778

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 778 of 1904 2022-03-04
Not Subject to NDA
AT+CGQREQ=?
Test command returns as a compound value the type of the current PDP
context and the supported values for the sub parameters in the format:
+CGQREQ: <PDP_Type>,
(list of supported <precedence>s),(list of supported <delay>s),
(list of supported <reliability>s),(list of supported <peak>s),
(list of supported <mean>s)
Additional info:
PDP type meaning.
Name
Type
Default
Description
<PDP_Type>
string
-
specifies the type of packet data
protocol (see +CGDCONT command)
AT+CGQREQ?
+CGQREQ: 1,0,0,3,0,0
OK
AT+CGQREQ=1,0,0,3,0,0
OK
AT+CGQREQ=?
+CGQREQ: "IP",(0-3),(0-4),(0-5),(0-9),(0-18,31)
+CGQREQ: "PPP",(0-3),(0-4),(0-5),(0-9),(0-18,31)
+CGQREQ: "IPV6",(0-3),(0-4),(0-5),(0-9),(0-18,31)
OK