Telit Wireless Solutions LE910C series - AT#BRCSFB - Blind G2 L Redirection after CSFB

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 502 of 1904 2022-03-04
Not Subject to NDA
3.4.44. AT#BRCSFB - Blind G2L redirection after CSFB
This command enables/disables blind GSM to LTE redirection after CS fallback
Parameters.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
Auto
No
-
2
AT#BRCSFB=<par>
This command enables/disables blind GSM to LTE redirection after CS
fallback Parameters.
Parameter:
Name
Type
Default
Description
<par>
integer
0
Values:
0
:
Disable blind G2L redirection after CSFB (default value)
1
:
Enable blind G2L redirection after CSFB
Value saved in NVM.
Requires reboot after set command.
The LE910Cx-EU variants has default value 1.
AT#BRCSFB?
The read command reports current state of blind G2L redirection after
CSFB.
Additional info: