Telit Wireless Solutions LE910C series - AT#FTPTYPE - FTP Type

LE910Cx AT Commands Reference Guide
80502ST10950A Rev. 14 Page 1382 of 1904 2022-03-04
Not Subject to NDA
3.18.16. AT#FTPTYPE - FTP Type
This command sets the FTP file transfer type.
SIM Presence
Setting saved
Can be aborted
MAX timeout
SELINT
Not required
No
No
-
2
AT#FTPTYPE=[<type>]
Set command, issued during a FTP connection, sets the file transfer type.
Parameter:
Name
Type
Default
Description
<type>
integer
N/A
file transfer type
Values:
0
:
binary
1
:
ASCII
The command causes an ERROR result code to be returned if no
FTP connection has been opened yet.
AT#FTPTYPE?
Read command returns the current file transfer type, in the format:
#FTPTYPE: <type>
AT#FTPTYPE=?
Test command returns the range of available values for parameter <type>: